What is the period of transition it?
"Running-in period" means new car "unconventional" to travel for some
time, let the engine, each rotation drive member chassis of running
smoothly. New car factory, since the machining accuracy and other
reasons, the period starts running, moving parts, each part of the
vehicle not running, therefore, it must be used with caution, otherwise
it will aggravate damage components for the future and security.
Running under the normal conditions of cement tanker 5000 road, although concrete mixer at the factory cold running process, but in order to maintain the best condition after the mechanical system and extend the service life of 1500 km before the recommendations must be careful driving your concrete truck mixer maintenance phases.
So the early speed can not be used because of high speed enables the engine and transmission components of the load increases. The speed should be controlled within a predetermined range. In the 1000-1500 km, can gradually increase the engine speed and the vehicle speed to the highest default rate. Not allowed to use long or high gear with the first gear; in each gear, do not make the speed limit is reached, each gear per hour speed to be controlled within the range of the top three-quarters speed, generally: 1 gear 25 km, 40 km 2 block 3 block 60 km, four-speed 90 km, 5-speed 100 km. We must not drill at this time driving skills, rush rushing. In addition to the speed limit outside the driver's injuries must strictly enforce rules, it is necessary to avoid full-throttle; the second is to maintain the normal operating temperature of the engine. At the same time the new car should Lawton, load factor should be less than 90%, and choose a flat road.
There is a need to check the transmission, front and rear drive axles, drive shafts and other if there is leakage. At the same time, braking capacity and tightness, seal Check the brake system. 200-500 kilometers before, thanks to new friction brake pads have not yet reached 100% of the braking effect, the brake should advance. Taking into account the tire friction force is not enough, when the brake foot than a little hard point under normal circumstances, this also applies to people who are just new tires or new owners of the brake pedal. In addition, it is preferable to check the entire vehicle exposed bolt and nut fastening.
Running under the normal conditions of cement tanker 5000 road, although concrete mixer at the factory cold running process, but in order to maintain the best condition after the mechanical system and extend the service life of 1500 km before the recommendations must be careful driving your concrete truck mixer maintenance phases.
So the early speed can not be used because of high speed enables the engine and transmission components of the load increases. The speed should be controlled within a predetermined range. In the 1000-1500 km, can gradually increase the engine speed and the vehicle speed to the highest default rate. Not allowed to use long or high gear with the first gear; in each gear, do not make the speed limit is reached, each gear per hour speed to be controlled within the range of the top three-quarters speed, generally: 1 gear 25 km, 40 km 2 block 3 block 60 km, four-speed 90 km, 5-speed 100 km. We must not drill at this time driving skills, rush rushing. In addition to the speed limit outside the driver's injuries must strictly enforce rules, it is necessary to avoid full-throttle; the second is to maintain the normal operating temperature of the engine. At the same time the new car should Lawton, load factor should be less than 90%, and choose a flat road.
There is a need to check the transmission, front and rear drive axles, drive shafts and other if there is leakage. At the same time, braking capacity and tightness, seal Check the brake system. 200-500 kilometers before, thanks to new friction brake pads have not yet reached 100% of the braking effect, the brake should advance. Taking into account the tire friction force is not enough, when the brake foot than a little hard point under normal circumstances, this also applies to people who are just new tires or new owners of the brake pedal. In addition, it is preferable to check the entire vehicle exposed bolt and nut fastening.
没有评论:
发表评论